7.5 HP Solar Water Pump Subsidy
The 7.5 HP solar water pump subsidy under the PM-KUSUM (Pradhan Mantri Kisan Urja Suraksha evam Utthaan Mahabhiyan) scheme covers 60% to 90% of the total system cost, depending on your state's specific subsidy structure. In Haryana, for example, a 7.5 HP DC submersible pump with normal controller costs farmers ₹1,13,629 after subsidy under the HAREDA programme, out of a full market price of ₹3 lakh or more before subsidy support. This guide covers exactly how the subsidy is structured, who's eligible, the state-by-state variation you need to know about, and the complete application process.
7.5 HP solar water pump subsidy at a glance
Parameter | Details |
Scheme name | PM-KUSUM Component B |
Central government contribution | 30% of total system cost |
State government contribution | Varies by state, typically 30% to 60% |
Farmer contribution | 10% to 40% depending on state |
Example: Haryana (HAREDA) price after subsidy | ₹1,13,629 (7.5 HP DC submersible, normal controller) |
Full market price before subsidy (approximate) | ₹3 lakh to ₹3.5 lakh |
Pump type covered | DC submersible with normal controller, or universal solar pump controller variants |
Maintenance included | Typically 5 years under most state schemes |
How the 7.5 HP solar water pump subsidy is structured
PM-KUSUM operates through a three-tier funding structure for Component B (individual standalone solar pumps):
Funding tier | Contribution | Notes |
Central financial assistance (MNRE) | 30% | Fixed central government contribution across all states |
State government subsidy | 30% to 60% (varies significantly) | Some states add substantially more support than the central minimum |
Farmer's own contribution | 10% to 40% | The remaining balance, sometimes partially available as bank loan financing |
In some states, combined central plus state subsidy reaches as high as 90%, bringing farmer contribution down to just 10% of total system cost. In others, the combined subsidy may be closer to 60-70%, meaning farmers contribute a proportionally larger share. This is why the same 7.5 HP pump can have meaningfully different out-of-pocket costs depending on which state you're applying in.
State-wise variation example: Haryana
Haryana's HAREDA (Haryana Renewable Energy Development Agency) has run PM-KUSUM Component B applications with the following structure:
Pump specification | Farmer payment after subsidy |
3 HP DC, Surface (Monoblock), normal controller | ₹53,926 |
7.5 HP DC, Submersible, normal controller | ₹1,13,629 |
10 HP DC, Submersible, normal controller | ₹1,42,170 |
This breakdown, calculated based on the Ministry of New and Renewable Energy covering 30% through central assistance and the Haryana state government covering an additional 45%, results in a combined 75% subsidy, with farmers paying only 25% of the total system cost.
Other states run their own portals with different percentage splits and application windows, so always check your specific state's renewable energy agency for current figures rather than assuming Haryana's numbers apply universally.
Eligibility criteria for PM-KUSUM 7.5 HP pump subsidy
- Must be an individual farmer with land ownership or documented cultivation rights
- Standalone solar agricultural pumps up to 10 HP capacity are eligible under this component
- Farmer must not already have an existing grid-connected electric pump connection in some state variations (verify specific state rules)
- Application must be submitted during the state's open application window, as these are not always continuously open
- Bank account details and Aadhaar linkage typically required for subsidy disbursement verification
How to apply for the 7.5 HP solar water pump subsidy
- Visit your state's renewable energy development agency website (HAREDA for Haryana, MEDA for Maharashtra, or the equivalent body for your state)
- Check for the current open application window for PM-KUSUM Component B individual pump subsidies
- Register on the portal with your farmer/landholder details
- Select the pump specification you require (7.5 HP DC submersible, in this case)
- Submit required documents: land ownership proof, Aadhaar, bank account details, and any state-specific requirements
- Pay the farmer's contribution amount as specified (this varies by state, as shown in the Haryana example above)
- Await installation scheduling through the agency's approved vendor network
- Confirm commissioning and any included maintenance period terms with the installing vendor
Critical fraud warning
Government subsidy portals have explicitly warned farmers to beware of fake and fraudulent websites claiming to process PM-KUSUM applications for a fee outside official channels. Only apply through your state's official renewable energy agency portal. If you're uncertain whether a portal or agent is legitimate, contact your district's Agriculture Department (ADC office) directly to verify before making any payment.
7.5 HP vs 3 HP: which capacity does your farm need?
Factor | 3 HP suitable if | 7.5 HP suitable if |
Farm size | Small to medium landholding | Larger landholding requiring higher water volume |
Water table depth | Moderate depth borewells | Deeper borewells requiring more lift power |
Irrigation method | Drip or sprinkler on smaller area | Larger area flood or extensive drip/sprinkler coverage |
Daily water requirement | Lower volume needs | Higher volume needs across larger cropped area |
For a smaller-capacity comparison and full submersible vs surface pump breakdown, see our companion guide on the 3HP submersible pump.
FAQs
What is the 7.5 HP solar water pump subsidy?
The 7.5 HP solar water pump subsidy under PM-KUSUM Component B covers 60% to 90% of total system cost through combined central (30%) and state (varies) government contributions, with farmers paying the remaining 10% to 40% depending on their state's specific structure.
How much does a 7.5 HP solar pump cost after subsidy?
In Haryana, under the HAREDA programme, a 7.5 HP DC submersible pump with normal controller costs farmers ₹1,13,629 after subsidy, against a full market price of approximately ₹3 lakh or more. Costs vary by state based on local subsidy percentages.
Who is eligible for the 7.5 HP solar water pump subsidy?
Individual farmers with land ownership or documented cultivation rights are eligible for standalone solar agricultural pumps up to 10 HP under PM-KUSUM Component B. Specific eligibility details, including any restrictions on existing grid-connected pumps, vary by state.
How do I apply for the 7.5 HP solar water pump subsidy?
Apply through your state's renewable energy development agency portal (HAREDA in Haryana, MEDA in Maharashtra, or the equivalent body for your state) during an open application window, submitting land ownership proof, Aadhaar, and bank details, then paying your state-specific farmer contribution amount.
Why does the subsidy amount differ between states for the same 7.5 HP pump?
The central government's 30% contribution is fixed nationally, but each state government sets its own additional subsidy percentage, ranging widely. States with higher additional contributions (like Haryana's 45% state share) result in lower out-of-pocket costs for farmers compared to states offering smaller additional subsidies.
Is the PM-KUSUM subsidy application process free?
The application itself through official government portals does not charge processing fees beyond your required farmer contribution toward the pump cost. Be cautious of any third-party website or agent asking for separate "processing fees" outside the official state agency portal, as these are common fraud attempts.
What documents are needed for the 7.5 HP pump subsidy application?
Typically required: land ownership or cultivation rights proof, Aadhaar card, bank account details for subsidy verification, and any additional documents specified by your state's renewable energy agency, which can vary slightly between states.
Is 7.5 HP the right capacity for my farm, or should I consider a smaller pump?
This depends on your borewell depth, required daily water output, and total cropped area needing irrigation. Smaller farms or shallower water sources may be adequately served by a 3HP pump at lower cost, while larger operations with deeper water tables typically need the higher lift capacity of 7.5 HP or above.
.jpeg)
.jpeg)
.jpeg)
