NS200 Battery Price

The ns 200 battery price ranges from ₹2,131 to ₹2,404 for genuine replacement options. The Bajaj Pulsar NS200 uses an 8 to 9 Ah 12V VRLA battery, which is significantly larger than the 3 to 5 Ah batteries found in commuter bikes like the Splendor or HF Deluxe. This is because the NS200's liquid-cooled 199.5cc engine with fuel injection and digital console draws more electrical load, requiring a higher-capacity battery for reliable cold starts and consistent voltage to the FI system.

If you own an NS200 and your bike is struggling to start, showing a dim digital console, or the horn sounds weak, this guide gives you the exact battery specifications, verified prices, and installation steps.

NS200 battery at a glance

NS200 battery price by brand and model

Note: "With old battery exchange" pricing is typically ₹150 to ₹250 lower than "without exchange" pricing across all brands, since the old battery's lead content has scrap value.

Why NS200 needs a bigger battery than commuter bikes

This is the detail most "NS200 battery price" articles skip: the higher price isn't just brand markup, it reflects a genuinely larger, more capable battery required by the bike's electronics.

Signs your NS200 battery needs replacement

1. Digital console flickers or dims at idle
2. Engine cranks slowly, especially in the first start of the day
3. ABS warning light appears intermittently (common early sign of low voltage on Dual Channel variants)
4. Horn sounds weak
5. Battery is 2+ years old with no replacement history
6. Bike has been parked unused for 3+ weeks (VRLA batteries self-discharge and can sulfate if left too low)

How to replace the NS200 battery

1. Turn off ignition, remove key
2. Open the seat using the lock (or side panel access, depending on variant)
3. Locate the battery compartment (typically under the seat near the airbox)
4. Disconnect negative terminal first, then positive
5. Remove the old battery, noting orientation
6. Install new battery in the same orientation
7. Connect positive terminal first, then negative
8. Secure the battery clamp/strap
9. Close the seat and test: horn, headlight, digital console, and ignition

Cost if done at a shop: Most authorised dealers include free installation with battery purchase. Independent mechanics may charge ₹100 to ₹200 for installation.

FAQs

What is the ns 200 battery price?

The ns 200 battery price ranges from ₹2,131 to ₹2,404 for genuine 8-9 Ah options from Amaron and Exide. Prices vary based on whether you exchange your old battery (lower price) or buy without exchange.

What Ah battery does Pulsar NS200 need?

The Pulsar NS200 needs an 8 to 9 Ah, 12V VRLA battery. This is larger than most commuter bikes because the NS200's liquid-cooled FI engine and digital console draw more electrical current.

Which is the best battery for Pulsar NS200?

Exide Xplore FXL0-12XL9-B (9Ah, 48-month warranty) offers the longest warranty period. Amaron ABR-PR-APBTZ9R (8Ah) is a reliable, slightly more affordable alternative. Both are genuine fitment options.

How long does the NS200 battery last?

2.5 to 4 years with regular riding. If the bike sits unused for extended periods, the VRLA battery can self-discharge and degrade faster, sometimes failing within 12 to 18 months. Regular short rides (even weekly) help maintain battery health.

Can I install a higher Ah battery in my NS200?

Not recommended unless the physical battery compartment dimensions allow it. A significantly higher Ah battery may not fit and could also overload the charging system's regulator. Stick to the 8-9 Ah range specified for this model.

Why is my NS200 battery draining fast?

Common causes: a parasitic drain from aftermarket accessories (like additional lighting or a phone charger left connected), a faulty voltage regulator overcharging or undercharging the battery, or the battery reaching end-of-life (2.5+ years old). Get the charging system tested if a new battery also drains quickly.

Does NS200 battery replacement affect warranty?

No, as long as you use a battery matching the OEM specification (8-9 Ah, 12V VRLA) and have it installed correctly. Using a non-standard battery that damages the electrical system could affect related warranty claims, so stick to genuine or equivalent branded batteries.

How is the NS200 battery different from other Pulsar models?

The Pulsar 150 and 220F typically use 4 to 5 Ah batteries since they lack liquid cooling. The NS200 and N250 (also liquid-cooled) require the larger 8-9 Ah battery. Always check your specific variant before ordering.